Pellet counting machine is a kind of machine and equipment used to make granular materials into specific sizes, usually used in pharmaceutical, chemical, food and other industries. Adjusting the discharging speed of the granulator is very important, which can affect the efficiency and quality of the whole production process.

Adjusting the discharging speed of granulator can be achieved mainly by the following methods:

1. Adjust the feeding amount: the discharging speed of granulator is affected by the feeding amount, the larger the feeding amount, the faster the discharging speed. Therefore, the discharging speed can be controlled by adjusting the feeding quantity. According to the production needs to gradually increase or decrease the amount of feed, and gradually adjust to the appropriate discharge speed.

2. Adjust the vibration frequency: the counting machine usually through the vibrator to achieve the movement and dispersion of granular materials, the adjustment of vibration frequency can affect the flow rate of granular materials and rows. By adjusting the vibration frequency, the discharge speed of the granulator can be changed. Usually, increase the vibration frequency can speed up the discharging speed, reduce the vibration frequency can slow down the discharging speed.

3. Adjust the screen aperture: the counting machine is usually equipped with different sizes and apertures of the screen, through the replacement of the appropriate screen can be adjusted to the size of the particles and discharging speed. Larger screen aperture can speed up the discharging speed, smaller screen aperture can slow down the discharging speed. By choosing the right screen aperture, it can meet the production demand of different granule sizes.

4. Adjust the motor speed: the motor of the granule counting machine usually can adjust the speed, by adjusting the motor speed can change the vibration frequency and working efficiency of the vibrator, thus affecting the discharging speed. Normally, increasing the motor speed can speed up the discharging speed, and decreasing the motor speed can slow down the discharging speed.

5. Adjust the size of the inlet and outlet: the size and shape of the inlet and outlet of the counting machine will also affect the discharging speed, the larger inlet and outlet can speed up the discharging speed, the smaller inlet and outlet can slow down the discharging speed. By adjusting the size and shape of the inlet and outlet ports, precise control of the discharge speed can be achieved.

When adjusting the discharging speed of the granulator, you need to pay attention to the following points. 1:

1. choose the suitable adjustment method according to the production needs, different adjustment methods will have different impact and effect.

2. pay attention to safety in the adjustment process to avoid accidental injury, especially be extra careful when adjusting the motor speed.

3. carefully observe the working status of the grain counting machine during the adjustment process, find out the problems and deal with them in time.

In general, adjusting the discharge speed of the granulator is a key operation, which needs to choose the appropriate adjustment method according to the actual production demand to ensure the efficiency and quality of the production process. Through reasonable adjustment, you can achieve better production results and economic benefits. I hope the above can help you better adjust the discharging speed of granule counting machine.