Capsule counting machine in the use of the process may encounter some problems, these problems may affect the production efficiency, or even cause damage to the equipment. The following are some common problems and solutions:

1. Inaccurate capsule count: If the capsule counting machine counts inaccurately during the production process, it may lead to a drop in product quality. This problem may be caused by the machine's sensor failure or inaccurate adjustment.

Solution: Firstly, check whether the sensor of the machine is working properly, if the sensor is faulty, replace or repair it in time. In addition, the parameters of the machine need to be adjusted to ensure the accuracy of the counting machine.

2. capsule blockage: in the production process of capsule counting machine, sometimes there will be a capsule blockage, which may be caused by the capsule in the conveying process of the stagnation or the machine inside the foreign body caused.

Solution: When the capsule is found to be blocked, it is necessary to stop the machine in time to deal with it. First of all, check whether the conveying line is smooth, there is no stagnation of the capsule, if so, need to clean up. In addition, regularly clean the inside of the machine to prevent foreign objects from entering the machine.

3. Machine noise: In the process of use, the capsule counting machine may be too noisy, which may affect the operator's working environment, and may also indicate that there is a failure inside the machine.

Solution: Firstly, check whether the parts of the machine are installed correctly and whether there is any loose phenomenon. In addition, you can lubricate the relevant transmission components to reduce friction, and regularly check the maintenance of the machine to ensure that the machine operates normally.

4. Capsule breakage: During the production process, the capsule may be broken due to external forces or problems with the machine itself, which will affect the quality of the product.

Solution: Firstly, adjust the parameters of the machine to ensure that the running speed of the machine meets the requirements, to avoid capsule breakage due to too fast. In addition, the sealing of the machine also need to do a good job of maintenance, to prevent external forces on the capsules caused by damage.

5. grain counting machine jam: in the production process, sometimes there will be grain counting machine jamming situation, this may be due to the conveyor belt jammed or the machine internal failure caused.

Solution: when the counting machine jam, first of all need to stop the machine in time to deal with, check the conveyor belt with or without jammed capsules. If the conveyor belt is stuck, it needs to be dealt with in time, if it is the internal failure of the machine, it needs to be repaired.

In general, capsule counting machine in the use of the process may encounter a variety of problems, but as long as the timely discovery of the problem and take the correct solution, you can ensure the normal operation of the equipment, improve production efficiency and ensure product quality. Therefore, the operator needs to regularly check the running status of the machine, do a good job of maintenance of the equipment, deal with problems in a timely manner to ensure the long-term stable operation of the equipment.