Bottle sizing machine (i.e. bottle sizing equipment) is a commonly used equipment in laboratories, pharmaceutical factories, food factories and other industries for filling, sealing, packaging and other tasks. It is very important to operate and debug the newly purchased bottle trimmer correctly, here are some steps and precautions:

1. Assemble the equipment: firstly, assemble the various parts of the equipment according to the instruction manual of the bottle sizer. Make sure all the parts are in place and connect the necessary equipment such as power supply and air supply.

2. Cleaning the equipment: Before first use, the equipment needs to be thoroughly cleaned to ensure that there are no impurities inside the equipment. Use detergent and water for cleaning, and then dry it with a clean towel or paper towel.

3. Commissioning the equipment: Turn on the power, open the control panel of the bottle trimmer, and set the appropriate parameters, such as speed, temperature, etc., according to the requirements of the manual. Then switch on the main power supply and debug the machine according to the operating steps of the equipment.

4. Test equipment: After the commissioning is completed, some simple test work can be carried out to observe the working condition of the equipment and check whether there is any air or liquid leakage. If problems are found, they need to be eliminated in time.

5. Formal use: when the equipment through the test and no problem, it can be formally put into use. In the process of use, pay attention to the observation of the working condition of the equipment, avoid prolonged continuous work, timely maintenance of equipment.

6. Regular maintenance: in order to ensure the normal operation of the bottle cutter, you need to regularly clean and maintain the equipment. Regular replacement of wearing parts to keep the equipment in good condition.

In general, the correct operation and debugging of the newly purchased bottle cutting machine need to read the manual carefully, follow the steps to operate, pay attention to safety, troubleshooting in time to maintain the normal operation of the equipment. Only in this way can we ensure the effective use of the equipment and improve work efficiency.